Agricultural diesel engine energy-saving six methods

First, increase the temperature of diesel engine cooling water Normal temperature of agricultural diesel engine is 65 degrees -95 degrees, but currently generally less than 45 degrees, so that the oil can not be completely burned, and the oil viscosity, increased operating resistance, so more fuel consumption. The solution is to increase the temperature of the diesel cooling water. Second, to ensure the best fuel supply advance angle When the diesel engine is used for a period of time, due to the wear of the plunger coupler and the injection pump transmission parts, the fuel supply advance angle will be reduced, resulting in too late oil supply, fuel consumption increase. The solution is to ensure that the fuel feed advance angle is at the optimum angle. Third, to maintain the machine does not leak oil The current diesel engine oil pipe is often due to uneven joints, gasket deformation or damage there is leakage of oil. The solution is: 1, the gasket coated with sand on the glass plate flattened to correct the tubing connector. 2. Add diesel recovery device. Such as the use of bicycle spokes cap instead of hollow screws, welded to the tank; can also be used to connect the oil return pipe on the nozzle with the hollow spiral, so that return oil into the tank. Fourth, more than half of the failures of oil purification before using the diesel engine come from the oil supply system. The solution is: 1, buy diesel back on hold for 2-4 days and then use, can precipitate 98% of impurities. 2. If you are buying it now, you can put two layers of silk cloth on the fuel tank filler screen so that impurities can be filtered off. V. Changing the practice of "big horse-drawn cars" The common "big machine with small water pump" on the well is actually a waste of energy. Improvement measures: appropriately increase the number of diesel engine pulleys, increase the speed of the pump in the case of a diesel engine running at a reduced speed, and increase the flow, lift, and shaft power to achieve energy-saving purposes. 6. Adjust the fuel injection pressure of the injector.