The use of the combine harvester for a short period of time, long time for parking, in order to extend the service life, reduce the failure of the operation, after the end of the summer harvest operations, the harvester should be properly kept in accordance with the following nine points.
1. Cleaning: Wash the soil inside and outside the harvester with water, clean up the wraps and other debris, remove the chain until the sludge is cleaned with diesel soaking, then soak it with oil for 5 to 10 minutes, remove the oil, and apply grease to the kraft paper Or plastic bag wrapped in a dry place.
2. Storage: After the machine is completely cleaned, the machine is put into the hangar. The inorganic library must be covered with rain and sun-proof. The plastic shed is used to wrap the diesel, oil filling port, air filter and exhaust pipe. Dust-proof soil enters.
3. Put on the net: After the engine shuts off, the oil in the oil pan is released while hot, and the diesel in the diesel engine is released. After the water temperature is lowered, the cooling water components such as the water tank and the body are turned on and the cooling water is discharged.
4. Dismantling: Remove all the belts, wipe them, and inspect them for damage. Record the belt position marks, store the talcum powder hanging in the cool and ventilated place in the hangar, remove the main electrical appliances such as generators and headlights, and keep them properly. Remove the battery and store it indoors to charge it. Winter attention to thermal insulation.
5. Inspection: Inspect worn and deformed parts, and focus on inspecting parts that have malfunctioned during operation and repair and replace them in time.
6. Anti-corrosion: The harvester often exposes to the sun, rain, friction, and collision and paints or sprays paint in time for corrosion protection. Apply anti-corrosion oil or butter to adjustment bolts and safety clutch claws on the cutter.
7. Relax: Relax the springs of each part so that they are not compressed. All parts of the hydraulic cylinder should be in the inoperative position.
8. Lubrication: The requirements of the Lubrication Harvester's Lubrication Drawings are followed by a thorough lubrication of the components.
9. Custody: Harvester parking place to do fire protection measures. Monthly engine cylinder, to add a little oil, at least to crank the crank 1 to 2 times, the operation of the hydraulic handle dozens of times.
Interlocking Intramedullary Nail,Femur Interlocking Nail,Bone Steel Plate,Interlocking Nail Instruments
Jiangsu Health Medical Technology Development Co., Ltd. , https://www.medicalhos.com